起动机出厂性能测试装置是为生产线进行产品出厂检查而设计制造的。

该测试装置功能：
             ·起动机开关的吸合试验（吸合电压、吸合电流）；
             ·起动机开关的释放试验（释放电压、释放电流）；
             ·起动机的动态啮合试验（判断起动机啮合时是否会铣齿）；
             ·空载试验（空载转速、空载电流）；
             ·负载试验（起动机在设定负载点的电压、电流、转速、转矩，可设两个负载点）；
             ·电流纹波试验（测试起动机的换向器纹波大小，并绘制纹波图）；
             ·制动试验（制动电压、电流、转矩）；
             ·断电试验（在制动状态下断开开关电路，判断起动机开关触点是否粘连）；
             ·运转试验（做完制动试验后再做一次空载）；
             ·超速试验（提高起动机电压，测试超速状态下起动机性能）；
             ·单向器试验（在指定转矩下，测试单向器的耐久性能）。
             以上试验项目可任意组合。

采用工控计算机进行数据采集、处理、存储。起动机出厂性能测试装置能够根据试验标准对试验结果进行判定，试验的数据可以存储和打印。自动绘制起动机性能曲线。试验过程自动控制。测试台的机械、负荷装置等装置采用先进的技术和零部件制造。

起动机试验用模拟蓄电池特性电源采用大功率开关电源技术，模拟精度高、效率高，纹波小。

此测试装置采用电机负载，负载稳定性极好，噪音小、寿命长。

This device is specially designed and developed for the factory quality inspection in its production-line.

Functions:

Starter current 0-2000 Amps, 0. 5%

Starter voltage 0-30 Volts, 0.5%

Starter speed 0-20,000 RPM, 1%

Starter torque 0-120NM

Solenoid current 0-150 Amps, 0.5%

Contact voltage drop 0-2.5 Volts, 0.5%

Starter efficiency 0-100%

Starter output power 0-10 kW, 0.5%

Starter input power 0-36 kW, 0.5%

The pull-in test of the starter switch(which includes the pull-in voltage and the pull-in current )

The release test of the starter switch(which includes voltage release and current release)

The dynamic mesh test of the starter(which judges whether mill or not optional)

Free spin test (which includes no-load speed and no-load current)

Load test (which tests the voltage, current, speed and torque on the set-up point and draw the full performance curve )

The Current ripple test (which tests the ripple size and draws the picture)

The brake test (which includes the brake voltage, current and torque)

The turn off test(which turn off the S terminal then judges the adhesion of the switch contacts )

The running test(after a high load test, then test a no-load test too)

The high-speed test (which tests the starter performance in a speeding state by increasing the voltage)

The one-way clutch test (which tests the one-way clutch performance of the one-way clutch in a fixed torque )

Available working voltages 380V 50HZ (other voltages optional)

All the tests can be arbitrarily combined.

This device adopts the industrial computers to carry out the data acquisition, processing and storage.Then, according to the experimental standard,the device could do a judgement of the test result. Moreover, we can also have the data stored or printed, the starter performance curve can be drawn too. And the whole process is what we call automation. Moreover,all machines and load devices are produced by the

parts with advanced technology.

In addition, it adopts the high-power switching power technology which is in high-precision, efficient and has small ripples.

More over,it adopts the motor load which possesses the excellent load stability, low-noise and long life.